Program Example - Mitsubishi Electric MELSEC Q Series User Manual

8
PROGRAMMING
8.4

Program Example

This section describes program examples.
The list below shows the devices used for program examples in and after Section 8.4.1.
(1) I/O signals of the EtherNet/IP module
Device
X00 Tag communication start process completion
X02 PING test completion
X06 Flash ROM access completion
X08 TCP/UDP/IP parameter change completion
X0D Acquiring IP address
X0E Own station error
X0F Module READY
(2) Special relays (SM)
Device
SM402
(3) Devices used by user
Device
M0 Flag for Tag communication start
Flag for Application Trigger of Class3/UCMM
M1
Tag No.1
Flag for Application Trigger of Class3/UCMM
M2
Tag No.2
M3 Flag for Application Trigger of Class1 Tag No.3
M4 Flag for Application Trigger of Class1 Tag No.4
Flag for Application Trigger of Class3/UCMM
M5
Tag No.4
Flag for Application Trigger of Class3/UCMM
M6
Tag No.5
Flag for data transmission permission of
M7
Class3/UCMM Tag No.6
M1000 to M1255 Refresh device for Application Trigger (Class1)
Refresh device for Application Trigger
M2000 to M2255
(Class3/UCMM)
Refresh device for communication status
M4000 to M4255
(Class1)
Refresh device for communication status
M4400 to M4655
(Class3/UCMM)
Table 8.3 I/O signals of the EtherNet/IP module
Application
Table 8.4 Special relays (SM)
Turns on during one scan after RUN is set
Table 8.5 Devices used by user
Application
-
Device
Y00 Tag communication start request
Y02 PING test execution request
Y06 Flash ROM access request
Y08 TCP/UDP/IP parameter change request
-
-
-
Application
Device
D100 to D104 Refresh device for own station error information
Refresh device for Class1 Diagnostics
D4000 to D4255
Information
Refresh device for Class3/UCMM Diagnostics
D4400 to D4655
Information
W0 to W4 Refresh device for Class1 Tag No.1
W5 to WD Refresh device for Class1 Tag No.2
D5000 to D5003 Refresh device for Class3/UCMM Tag No.1
D5004 to D5010 Refresh device for Class3/UCMM Tag No.2
D5011 to D5030 Refresh device for Class3/UCMM Tag No.3
W100 to W107 Refresh device for Class1 Tag No.3
W108 to W113 Refresh device for Class1 Tag No.4
D5100 to D5105 Refresh device for Class3/UCMM Tag No.4
D5106 to D5116 Refresh device for Class3/UCMM Tag No.5
D5117 to D5146 Refresh device for Class3/UCMM Tag No.6
8.4 Program Example
Application
-
-
-
Application
8
- 10
1
2
3
4
5
6
7
8