Table of Contents
Advertisement
Engineering
8
Detector line
8.4 Detector line
8.4.1 Restart
8.4.2 Power off
84 | 124
Building Technologies
Fire safety
The 'Restart' function is used to restart a detector line.
1. Press
on the keypad.
a The 'Main menu' window is open.
2. Select 'Engineering' and press
a The 'Engineering' window is open.
3. Select 'Detector line' and press
a The 'Detector line' window is open.
4. Select 'Restart' and press
a The 'Restart' window is open.
5. Select one desired detector line and press
a A confirmation dialog window is open.
6. Press
to confirm.
a The line is restarted.
a The message 'Line startup is in progress...' is displayed. The panel returns to
previous status after restart.
The 'Power off' function is used to power off a detector line.
1. Press
on the keypad.
a The 'Main menu' window is open.
2. Select 'Engineering' and press
a The 'Engineering' window is open.
3. Select 'Detector line' and press
a The 'Detector line' window is open.
4. Select 'Power off' and press
a The 'Power off' window is open.
5. Select one desired detector line and press
a A confirmation dialog window is open.
6. Press
to confirm.
a The detector line is powered off.
Restart the detector line to power it on.
.
.
.
.
.
.
.
.
A6V10421795_en--_g
2016-11-18
Advertisement
Table of Contents
