Table of Contents
Advertisement
8.4.6.2 Locate devices
Building Technologies
Fire safety
The 'Locate devices' function is used to find a device on site.
1. Press
on the keypad.
a The 'Main menu' window is open.
2. Select 'Engineering' and press
a The 'Engineering' window is open.
3. Select 'Detector line' and press
a The 'Detector line' window is open.
4. Select 'View / locate' and press
a The 'View / locate' window is open.
5. Select 'Locate devices' and press
a A list of all lines is displayed.
6. Select one desired detector line and press
a A list of all devices is displayed.
7. Select one desired device and press
a Two commands are listed.
8. Select 'Locate' and press
a A confirmation dialog window is open.
9. Press
to confirm.
a The device is located.
a The LED indicator on the device is flashing.
The above procedure can also be used to exit locate status if the device is found.
.
.
.
.
.
.
.
Engineering
8
Detector line
91 | 124
A6V10421795_en--_g
2016-11-18
Advertisement
Table of Contents
