Siemens SINUMERIK 840Di Function Manual page 862

Data Lists
5.2 Setting data
5.2 Setting data
5.2
5.2.1 Channel-specific setting data
Number Identifier: $SC_
42440 FRAME_OFFSET_INCR_PROG
42980 TOFRAME_MODE
5.3 System variables
5.3
Names
$AC_DRF[axis]
$AA_ETRANS[axis]
$AA_OFF[axis]
$P_UIFR[n]
$P_CHBFR[n]
$P_SETFR
$P_EXTFR
$P_PARTFR
$P_TOOLFR
$P_WPFR
$P_CYCFR
$P_TRAFRAME
$P_NCBFR[n]
$P_UBFR
$P_SETFRAME
$P_EXTFRAME
$P_PARTFRAME
$P_TOOLFRAME
$P_WPFRAME
$P_CYCFRAME
$P_TRAFRAME
5-4
Description
Zero offsets are traversed on incremental
programming
Determination of the direction of X and Y axes for
frame definition
Description
DRF offset (differential resolver function)
Offset value zero offset external
Overlaid motion for programmed axis
Settable frames, activated via G500, G54 to G599
Channel basic frames, activated via G500, G54 to G599
System frame for PRESET and scratching in data management
System frame for zero offset external in data management
System frame for TCARR and PAROT in data management
System frame for TOROT and TOFRAME in data management
System frame for workpiece reference points
System frame for cycles
System frame for transformations
NCU basic frames, activated via G500, G54 to G599
Basic frame in channel activated after G500, G54 to G599 Corresponds to
$P_CHBFR[0].
Current system frame for PRESET and scratching
Current system frame for zero offset external
Current system frame for TCARR and PAROT with an orientational toolholder
Current system frame for TOROT and TOFRAME
Current system frame for workpiece reference points
Current system frame for cycles
Current system frame for transformations
Axis Types, Coordinate Systems, Frames (K2)
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0