Siemens SINUMERIK 840Di Function Manual page 402

Detailed Description
2.3 Setpoint/actual-value system
Machine data actual-value routing
The following machine data must be parameterized for each actual-value branch:
MD30210 $MA_ENC_SEGMENT_NR[n] (actual-value assignment of bus segment):
The number of the bus segment, via which the encoder is addressed, is entered here.
Depending on the SINUMERIK version, certain bus segments are preassigned.
•
•
•
•
•
•
•
MD30220 $MA_ENC_MODULE_NR[n])
(actual-value assignment: drive module number/measuring circuit number):
The number of the module in the bus segment, via which the encoder is addressed, is entered here.
The logical drive number of the axis module can be set via machine data:
MD13010 $MN_DRIVE_LOGIC_NR[n]
for:
•
•
•
MD30230 $MA_ENC_INPUT_NR[n])
(actual-value assignment: input on drive module/measuring circuit module):
The number of the input, to which the position actual-value encoder is connected, is entered here.
•
•
MD30240 $MA_ENC_TYPE[n] (type of actual-value acquisition):
Enter the encoder type used here.
2-28
Local bus (similar to SINUMERIK FM NC, for example)
611D I/O bus (1st DCM, e.g. SINUMERIK 810D)
Local I/O bus
611D I/O bus (2nd DCM)
Reserved for virtual buses
PROFIBUS-DP (NCU 573.2 and higher)
(PROFIBUS line for ProfiSafe at PLC end)
PROFIBUS DP link module (NCU 573.2 and higher)
SINUMERIK 810D
SINUMERIK 840D as 611 digital drive number
SINUMERIK 840D PROFIBUS on link module
SINUMERIK 840D/810D:
SINUMERIK FM NC:
= 1 or 2 (counting down)
= 1 - 4, in accordance with input selected X3 - X6
Velocities, Setpoint/Actual-Value Systems, Closed-Loop Control (G2)
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
= 0
= 1
= 2
= 3
= 4
= 5
= 6
Range of values 0 - 15
Range of values 0 -31
Range of values 0 -125