Siemens SINUMERIK 840Di Function Manual page 716

Index
R
Rapid traverse, 2-159
Reaching simulated target point for LEAD with JOG,
2-71
Read-in disable, 2-86
REPOS acknowledgments, 2-50
REPOS operation, 2-44
Reposition positioning axes, 2-47
Repositioning neutral axes after SERUPRO, 2-47
Repositioning point, 2-55
Reset, 2-86, 2-101
RESET, 2-135
RESET command, 2-83
RETREAT_MOVE_THREAD, 2-102
Runtime
Measurement, 2-160
Of the NC program, 2-159
Of the path axes, 2-159
S
SD42100, 2-22
SD42101, 2-22
SD42444, 2-27
Selection, 2-80
Self-acting SERUPRO, 2-60
SERUPRO approach, 2-40
SERUPRO ASUP, 2-40
SERUPRO operation, 2-40
SERUPRO supports the following NC functions, 2-68
SerurpoMasterChan, 2-60
SET_USER_DATA, 2-102
SETINT, 2-104
Single block, 2-86
Program operation mode, 2-20
Suppression, 2-116, 2-119
SINGLEBLOCK_DECODIER, 2-101
SINGLEBLOCK_IPO, 2-101
SINGLEBLOCKSTOP, 2-101
Spindle stop, 2-86
STOP_ALARM, 2-102
Index-4
STOPALL, 2-101
STOPATEND_ALARM, 2-102
STOPATIPOBUF_EMPTY_ALARM_REORG, 2-102
STOPATIPOBUFFER_ISEMPTY_ALARM, 2-102
STOPPROG, 2-101
STOPPROGATASUPEND, 2-102
STOPPROGATBLOCKEND, 2-101
STOPRUN, 2-102
System variable
Channel-specific, 2-159
NCK-specific, 2-159
SYSTEM_SHUTDOWN, 2-102
T
Tangential control, 2-73
TEACH IN, 2-6
Timers
Channel-specific, 2-159
Tool
Management, 1-4
Operating time, 2-159
U
Updating the REPOS offset within the scope, 2-52
Userdefined ASUB, 2-43
Userdefined system ASUBs, 2-111
W
WAITE, 2-102
WAITM, 2-102
WAITMC, 2-102
Workpiece
Counter: Example, 2-162
Workpiecerelated actualvalue system
RESET and power-up response, 2-138
Mode Group, Channel, Program Operation, Reset Response (K1)
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0