Siemens SINUMERIK 840Di Function Manual page 455

Data Lists
5.1 Machine data
5.1
5.1.1 Memory specific machine data
Number Identifier: $MM_
9004 DISPLAY_RESOLUTION
9010 SPIND_DISPLAY_RESOLUTION
9011 DISPLAY_RESOLUTION_INCH
5.1.2 NC-specific machine data
Number Identifier: $MN_
10000 AXCONF_MACHAX_NAME_TAB[n]
10050 SYSCLOCK_CYCLE_TIME
10070 IPO_SYSCLOCK_TIME_RATIO
10060 POSCTRL_SYSCLOCK_TIME_RATIO
10080 SYSCLOCK_SAMPL_TIME_RATIO
10200 INT_INCR_PER_MM
10210 INT_INCR_PER_DEG
10220 SCALING_USER_DEF_MASK
10230 SCALING_FACTORS_USER_DEF[n]
10240 SCALING_SYSTEM_IS_METRIC
10250 SCALING_VALUE_INCH
10260 CONVERT_SCALING_SYSTEM
10270 POS_TAB_SCALING_SYSTEM
10290 CC_TDA_PARAM_UNIT
10292 CC_TOA_PARAM_UNIT
13000 DRIVE_IS_ACTIVE[n]
Velocities, Setpoint/Actual-Value Systems, Closed-Loop Control (G2)
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
Description
Display resolution
Display resolution for spindles
Display resolution for INCH system of measurement
Description
Machine axis name
System basic cycle
Factor for interpolator cycle
Factor for position-control cycle
Division factor of position-control cycle for actual-
value acquisition
Computational resolution for linear positions
Computational resolution for angular positions
Activation of scaling factors
Scaling factors of physical quantities
Basic system metric
Conversion factor for switchover to
inch system
Basic system switchover active
Measuring system of position tables
Physical units of the tool data for CC
Physical units of the tool edge data for CC
Drive activation
5
5-1