Siemens SINUMERIK 840D sl Function Manual page 129

03/2013
Function
Alarms
Initiate
trigger for
the following
alarms
Exclusion list
Exclude the
following
alarms
Conditions
Note
If an alarm occurs, an action is only initiated if the PLC condition described here
occurs at the same time. If an alarm is pending and the condition is met after this,
the action will not be initiated.
See also Section: Machine trigger on "PLC variable"
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
Description
Enter the alarms to be initiated:
List of individual alarms separated by commas, or
alarm number ranges separated by "–".
Enters the alarms that must not result in
initiating: List of individual alarms separated by
commas or alarm number ranges separated by
"–".
Opens the submenu for entering a PLC
condition.
3 Setting up functions
3.4 Fault services
Type
DISPLAY
INPUT
(max. 200
characters;
any numerals
permissible)
, and – are
permissible
special
characters)
INPUT
ACTION
3-129