Siemens SINUMERIK 840D sl Function Manual page 159

03/2013
Fig. 3-44: Example - cyclic trigger on variable monitor
An interval value can be specified for each variable provided. As soon as the
variable value has exceeded the initiating value, the trigger is initiated and a new
count interval begins. The trigger value is incremented by the configured interval
value. If several counters are combined in one trigger, the first counter to exceed
the interval limit triggers the trigger. A new count interval then starts for all counters
that are combined in the trigger.
Function
View
Name
Axis
Status
Trigger
Interval
Remainder
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
Description
Name of the variable.
Axis identifier: NC axis name.
Counter status, corrected by
SINUMERIK Integrate, for current absolute
variable content.
Counter status for the next initiation, either
specified by an entry or automatically calculated
and entered by SINUMERIK Integrate upon
interval change.
Interval value
Numerical and graphic display of the remaining
count units until next initiation
3 Setting up functions
3.4 Fault services
Type
DISPLAY
INPUT
(max. 100
characters; all
characters are
permissible,
exception <)
DISPLAY
DISPLAY
DISPLAY
INPUT
(With
SINUMERIK In
tegrate
update)
DISPLAY
INPUT
(Up to a max.
of 9 digits)
DISPLAY
3-159