Siemens SINUMERIK 840D sl Function Manual page 84

2 Machine information
2.5 Maintenance
Function Additional
Search function
Due status
Due
Due status
edited
Due date
scheduled for
open jobs
Closed in time
period
Responsible
organization
2-84
Description
Irrespective of the activation - event-
controlled or time-controlled - of a
maintenance job, setting the filter to "due"
permits the jobs to be selected that should
now be done.
The filter can also be used to select the other
statuses and precisely not this "due" one, in
order that these jobs do not appear in the
selection list.
The due status can specifically be used to
select the maintenance jobs that shall be
contained in the selection result.
If the due status is set as filter, but no status
is selected, then the result list will be empty.
No matter how the maintenance jobs were
once initiated, only the completed jobs can
be selected.
The filter can also be used to select the other
statuses and precisely not this one, in order
that these jobs do not appear in the selection
list.
The due status can specifically be used to
select the maintenance jobs that shall be
contained in the selection result.
If the due status is set as filter, but no status
is selected, then the result list will be empty.
Starting at the specified time, only the open
maintenance jobs are included in the
selection result.
Note: This filter only has an effect on new
and open maintenance jobs.
The selection result only contains the closed
maintenance jobs after the entered date.
In order that specific plans can be made, the
selection list can be generated specifically for
a certain organization.
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
Type
SELECT
DISPLAY
SELECT
DISPLAY
INPUT
1 to 999,999
INPUT
DD.MM.YYYY
SELECT
DISPLAY
© Siemens AG 2006-2013 All Rights Reserved
03/2013
