Siemens SINUMERIK 840D sl Function Manual page 161

03/2013
Fig. 3-45: Example, PLC variable - selection: Variable monitor counter
Function
Name
PLC monitor
Selection
Each trigger can be assigned a label, which determines its behavior at the central
start date for maintenance.
See also Section Editing the master data of a machine and the general description
of the trigger in Section: Setting up functions.
Options:
•
If a label has been set and a start date, which has not yet been reached, has
been configured in the master data, the trigger will not be initiated.
•
If the date has been reached or is in the past, the trigger will be initiated
according to the conditions set for it.
•
If a start date has not been configured, or the label has not been set, the
trigger will be initiated according to the conditions set for it.
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
Description
Name of the new trigger.
Display all possible PLC monitors for which a
trigger can be initiated.
The variable can be marked for use once per
trigger. Any number of variables can be
selected.
3 Setting up functions
3.4 Fault services
Type
DISPLAY
INPUT
(max. 40
characters; all
characters are
permissible,
exception <)
ACTION
SELECTION
3-161