Global Settings; Setting The Notification Limit - Siemens SINUMERIK 840D sl Function Manual

03/2013

3.5 Global settings

3.5.1 Setting the notification limit

Function description
The notification limit function permits a repetition delay to be set for a selectable
time, during which no notifications are sent after the initial one. This prevents, for
example, a glut of alarms being output in the event of a faulty configuration or
trigger signal.
Fig. 3-70: Setting the notification limit
Function
Status
Active
Do not
send any
messages
for
Note
When the notification limit is active, all events are recorded in the event history.
However, the first notification is sent within the set time window in order to
prevent, if necessary, an overflow in the mailbox.
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
Description
Switches the notification limit for the machine
on/off.
Note:
This setting is activated immediately after storage
of a change.
Time for the notification limit.
The configuration of the notification limit can be
transferred to other control monitors. See Section:
Control monitor - Detailed view
3 Setting up functions
3.5 Global settings
Type
SELECTION
INPUT
SELECTION
INPUT
1 to
1440 minutes
1 to 24 hours
3-187