Siemens SINUMERIK 840D sl Function Manual page 99

03/2013
Add variables by selecting them from predefined variables:
Function
Axis
Select all
Add
Select NC variables
Select user-defined variables
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
Description
The variables that can be selected refer to one
axis each. This axis is defined with this selection
field.
All variables that are available are selected.
The selected variables are added to the
configuration of the variable monitor.
Changeover in the variable tree between
predefined variables.
The variables are described in detail in the
SINUMERIK documentation.
Changeover in the variable tree between
predefined variables.
Constant:
The constant is always 1 and is used to check the
variable monitors.
Start time:
The start time is the time stamp as of which
variables can be recorded (client runs on the
frontend PC).
Current time:
The current time is the time stamp of the frontend
PC at the time of recording via the variable
monitor.
3 Setting up functions
3.1 Maintenance
Type
DISPLAY
SELECTION
SELECTION
ACTION
Function
3-99