Measuring Series - Siemens SINUMERIK 840D sl Function Manual

5 Statistics/export
5.1 Multi-machine views
Function
Total
Back

5.1.3 Measuring series

Function description
On the basis of a measuring series of an examined machine, it is often not possible
to decide whether the viewed machine is in a good or a poor condition. This
applies in particular when only few measurement data is available for the inspected
machine. By comparing the measurement data between machines of the same
make, you might be able to assess even with few data records whether a machine
is in an acceptable condition.
Fig. 5-8: Initial state of the multiple-machine evaluation
5-242
Description
Total number of events of all priorities: If the
control monitors for the machine were opened
with the "+" icon, the number of entries is also
displayed for each control monitor.
Back to the basic menu "Statistics/Export"
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
© Siemens AG 2006-2012 All Rights Reserved
03/2013
Type
DISPLAY
ACTION