Performing A Test Series - Siemens SINUMERIK Series Function Manual

3 Setting up functions
3.2 Configuring measurements and measurement series

3.2.4 Performing a test series

Overview
Test series are used to automate measurements for condition monitoring to a great
extent. A test series can contain any number of measurement series. These meas-
urement series are performed one after the other in the defined order when a test
series is run. An machine operator is only required at the machine for the purpose
of starting the test series.
The measurements are made and measurement results stored without any further
operator actions.
Function description
Fig. 3-16: Changing the configuration of a test series
The following entries have to be made to configure a test series:
Function
Name
Channel
Comment
3-106
Description
Name of the test series. The system suggests
an automatically generated name, which you
can change. The names of test series must be
unique within the context of the machine. The
system adds another element to the name
automatically if the name entered by the ma-
chine operator has already been assigned to
another test series.
Selection of the required channel.
Text that can be freely entered for a detailed
description of the test series.
ePS Network Services, Function Manual (FH) - 03/2012
Type
INPUT
SELECTION
INPUT
© Siemens AG 2012 All Rights Reserved
03/2012