Siemens SINUMERIK Series Function Manual page 220

4 Organizational tasks
4.1 Maintenance
Function
Status
Machine ID
Name
Author
Responsible
organization
4-220
Description
Indicates the status of the job. The status can be
changed by the user at this point.
Opening the job should indicate that the
maintenance procedures required in the job
have already been carried out.
Closing the maintenance job corresponds to
acknowledging it; here it can be determined
whether the maintenance procedures were
performed successfully.
The status of a maintenance job is "new" when it
is has not yet begun or when it is due.
The job can be opened to carry out the
maintenance procedure.
The job can also be closed right away as OK or
not OK.
The status of a closed job can no longer be
changed.
A job that has been opened can only be closed.
Display of the machine ID from the machine
master data which differs for the same job
depending on whether the maintenance job list
is viewed from the point of view of any given
partner, or from your point of view
Name of the maintenance schedule which the
user has specified during configuration
Here, the system automatically enters the user
logged onto ePS Network Services who has
most recently opened the maintenance job on
the machine operator panel.
Indicates the organization configured in the
maintenance schedule as taking responsibility
The user can select a different organization to
be responsible for this particular maintenance
job, from a drop down list box.
See also Section: Editing the master data of a
machine
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
03/2012
Type
SELECTION
DISPLAY
DISPLAY
DISPLAY
DISPLAY
SELECTION
INPUT