Siemens SINUMERIK Series Function Manual page 157

03/2012
Function
Start time
Common start
date
Next initiation
alternatively
- All
- Weekly
- Monthly
All
Weekly
Monthly
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
Description
If participation in common start date is selected,
you cannot make any entries here.
The starting time for the trigger can be specified
in hours and minutes.
If no entry is made, the actual clock time that is
already pre-assigned is applied.
If participation in common start date is selected,
the time is automatically set.
Even if the common start date is subsequently
changed, it is automatically corrected.
The start date can only be selected if trigger
participates in common start date is deselected.
To check the trigger instant, the instant in time of
the next initiation is displayed with date and
time.
The type of interval must be clearly selected.
You can only select one of the three options.
Enter a cycle 'n' in the selected time unit
- Seconds (at least 5)
- Minutes
- Hours
- Days
The intervals that can be selected are restricted
to one or more days of the week, Monday to
Friday and a time window for the selected days
of the week.
The interval runs regardless of the deselect
restriction.
At the end of the interval, the trigger will be acti-
vated in the selected time window of the day and
time.
The next interval only starts once the trigger has
been successfully triggered.
Enter a cycle 'n' in
- Weeks,
by selecting a day of the week from Monday to
Sunday
Enter a cycle 'n' in
- Months.
3 Setting up functions
3.4 Fault services
Type
DISPLAY
INPUT
(Time format
with leading
zeros)
DISPLAY
SELECTION
(Toggle)
DISPLAY
DISPLAY
SELECTION
(Toggle)
DISPLAY
INPUT
SELECTION
(1 to 99 999
minutes or
hours)
DISPLAY
INPUT
SELECTION
(1 to 99 999
minutes or
hours)
DISPLAY
INPUT
3-157