Siemens SINUMERIK Series Function Manual page 180

3 Setting up functions
3.4 Fault services
Function
Data block
No.
Start byte
Number of
bytes
Function description "Trigger variable monitor(s)"
Using the "Trigger variable monitor(s)" action, the variables configured in the se-
lected variable monitors are read from the control and uploaded. In order to exe-
cute variable monitors as an action in a control monitor, they must have been con-
figured beforehand. All configured variable monitors are offered for selection here.
Fig. 3-63: Variable monitors - list view
Function
Trigger variable
monitor
3-180
Description
Number of the data block to be loaded to the
ePS server.
Start byte as of which the data of the data block
will be loaded (inclusive).
Number of bytes to be loaded as of the start
address.
Description
At the trigger event, the variable monitor
acquires the variables that are configured in
the variable monitor.
In addition to a label indicating that they
have been selected, the background of each
variable monitor is highlighted in yellow.
Labels show detailed information for each
variable monitor that is described in the
configuration of the variable monitors.
ePS Network Services, Function Manual (FH) - 03/2012
Type
DISPLAY
INPUT
(Digits from
0 to 9999)
DISPLAY
INPUT
(Digits from
0 to 99.999)
DISPLAY
INPUT
(Digits from
0 to 999.999)
Type
SELECTION
© Siemens AG 2012 All Rights Reserved
03/2012