Siemens SINUMERIK Series Function Manual page 225

03/2012
Function
Author
Responsible
org.
Work
instructions
Files
Comment
Axis tests
Test results
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
Description
Important:
Even when the display has a particular status, it
is not actually set to this. In each case, the status
must be confirmed with "OK" in order for it to
take effect and for the display to be set to this.
This can be monitored by calling the mainte-
nance job again.
Here, the system automatically enters the user
logged onto ePS Network Services who has
most recently opened the maintenance job on
the machine operator panel.
Not displayed, since the responsible organization
would never inadvertently look for the job on the
machine
Description of the maintenance procedures to be
performed. This field displays the work
instructions for the person performing
maintenance.
In order to provide a more detailed description of
the job, additional documents can be attached in
PDF format by means of "Add file", or can be
attached for this job on an individual basis. It is
also possible to directly view files that have al-
ready been attached.
Note:
The first document of the list has been prese-
lected and can be directly opened with "View
file". Other documents in the list can only be
viewed if they have been selected with the cur-
sor beforehand.
Description of the maintenance procedures to be
performed. This field displays the maintenance
report of the maintenance technician.
The axis tests included in the maintenance job
can be performed directly from this point. The
test results are saved together with the corre-
sponding measurement series.
See also Section: Configuring measurements
and measurement series
The results of the axis tests can be viewed di-
rectly from this point.
Note:
The result can also originate from previous proc-
essing of the job, provided this was not com-
pleted with "closed" status.
4 Organizational tasks
4.1 Maintenance
Type
No display
No display
DISPLAY
DISPLAY
SELECTION
DISPLAY
INPUT
(Max. 1000
characters;
including
blanks)
ACTION
ACTION
4-225