NEC Express5800/R320g-E4 Installation Manual page 20

Chapter 1 Installing Operating System
4. Run POST.
After a while, the following message appears at lower left of the screen.
Press <F2> SETUP, <F4> ROM Utility, <F12> Network
If you press F2, SETUP will start after POST, and the Main menu appears. (You can also start SETUP
by pressing F2 while expanding option ROM.)
5. When you move the cursor onto "Advanced", the Advanced menu appears.
Choose "PCI Configuration" and press Enter.
20
For [System Time], use Coordinated Universal Time (UTC). The specified UTC time is
Tips
applied to the ESXi host to be installed later. In ftSys Management Appliance or other guest
OS, set the time zone for each system.
Express5800/R320g-E4, R320g-M4 Installation Guide (VMware)
1. Setup Procedure