Enabling Os Boot Monitoring Function - NEC Express5800/R320g-E4 Installation Manual

Chapter 1 Installing Operating System
1.12

Enabling OS Boot Monitoring Function

Enables OS Boot Monitoring feature.
Set OS Boot Monitoring feature to Enabled on BIOS SETUP according to Chapter 1 (1.5 Disabling OS Boot
Monitoring Function). Then, specify the timeout time for OS Boot Monitoring Timeout parameter appropriately.
60
Specify the timeout time in seconds. Default setting is 600 seconds (10 minutes).
Tips
Express5800/R320g-E4, R320g-M4 Installation Guide (VMware)
1. Setup Procedure