NEC Express5800/R320g-E4 Installation Manual page 22

Chapter 1 Installing Operating System
9. Make sure that PCI Slot x Option ROM for the PCI slot in which Fibre Channel card is installed shows
Enabled, and all other items show Disabled.
This is the end of steps for enabling Fibre Channel card. Press the ESC key two times to return to the
previous screen.
10. Change "Boot Mode" Setting, because it's necessary to be set HBA configuration by next step.
When you move the cursor onto "Boot", the Boot menu appears.
Move the cursor onto "Boot Mode" and press Enter.
Parameters will be dislayed. Select "Legacy" and press Enter.
11. It continues to disable OS boot monitoring Function.
Proceed to "Chapter 1 (1.5 Disabling OS Boot Monitoring Function)" to continue setup.
22
Express5800/R320g-E4, R320g-M4 Installation Guide (VMware)
1. Setup Procedure