Firewall Setting For The Esxi Host - NEC Express5800/R320g-E4 Installation Manual

Chapter 1 Installing Operating System

Firewall setting for the ESXi host

Connect to the ESXi host from Host Client to configure.
1. Connect to the ESXi host from the Web browser, select [Networking] of Navigator, and select the
"syslog" item shown in the table from the [Firewall rules] tab.
Select [Enable] from the [Actions] menu or the items displayed by right-clicking.
2. Check that the "syslog" items are not disabled (displayed in gray) but enabled (displayed in black).
From the [Actions] menu or [Disable] displayed by right-clicking, check again that the syslog is enabled.
VMware ESXi has been installed.
Express5800/R320g-E4, R320g-M4 Installation Guide (VMware)
1. Setup Procedure
39