NEC Express5800/R320g-E4 Installation Manual page 21

Chapter 1 Installing Operating System
6. Move the cursor onto "PCI Device Controller and Option ROM Settings", and press Enter.
7. Move the cursor onto "PCI Slot x Option ROM" (x: the slot where Fibre Channel card is installed) and
press Enter.
Parameters will be displayed. Select "Enabled" and press Enter. The current display of the
configuration for PCI Slotx Option ROM will be changed to "Enabled".
8. Select an item other than PCI Slot x Option ROM for the PCI slot in which Fibre Channel card is
installed, and press Enter. Select Disabled from the parameters displayed, and press Enter. Repeat
these steps for all items other than PCI Slot x Option ROM for the PCI slot in which Fibre Channel card
is installed.
Express5800/R320g-E4, R320g-M4 Installation Guide (VMware)
1. Setup Procedure
21