Connection Description; Line/Load Connection - Siemens SINAMICS S120 Equipment Manual

2.6.3

Connection description

The line reactor is rated for a voltage range from 3-ph. 380 V AC -10% to 3-ph. 480 V AC
+10% at 47 Hz to 63 Hz.
Figure 2-9
2.6.3.1

Line/load connection

Table 2-12 Connection methods for line reactor
Terminals
Line supply connection
Load connection
Line reactors for Active Line Modules
16 kW
36 kW
55 kW
80 kW
120 kW
*
See Screw Terminals
Equipment Manual for Booksize Power Units
Equipment Manual, (GH2), 03/2006 Edition, 6SL3097-2AC00-0BP3
Line reactor (example: 16 kW)
Designations
1U1, 1V1, 1W1, PE
1U2, 1V2, 1W2
Screw terminal 16 mm 3–pin/6 Nm*
2
Screw terminal 35 mm 3–pin/6 Nm*
2
Screw terminal 70 mm 3–pin/6 Nm*
2
Connection strap d = 9 mm
Note: No shock-hazard protection (IP00B acc. to 60529)
Connection strap d = 10 mm
Note: No shock-hazard protection (IP00B acc. to 60529)
2.6 Line reactors for Active Line Modules
(M10/25 Nm) for ring cable lugs to DIN 46234
2
(M10/25 Nm) for ring cable lugs to DIN 46234
2
Line Connection Booksize
2-21