Line Modules Booksize; Introduction - Siemens SINAMICS S120 Equipment Manual

Line Modules Booksize

3.1

Introduction

3.1
Line Modules generate a DC voltage that is used to power the Motor Modules from the
connected supply voltage.
The Active Line Modules and the Smart Line Modules 16 kW and 36 kW have DRIVE-CLiQ
interfaces for communications with the Control Unit. The Smart Line Modules 5 kW and
10 kW must be connected with the Control Unit via terminals.
Figure 3-1
General characteristics of the Line Modules
• Connection voltage: 3-ph. 380 V AC –10% to 3-ph. 480 V AC +10% (-15% <1 min) (47 to
• Suitable for TN, TT, and IT supply systems
• Regenerative feedback capability
• Internal/external air cooling
• Short-circuit/ground-fault-proof during the precharge phase
• Integrated DC link and electronics current busbar connection
• LEDs for indicating statuses and for diagnostics
Equipment Manual for Booksize Power Units
Equipment Manual, (GH2), 03/2006 Edition, 6SL3097-2AC00-0BP3
Overview of Line Modules
63 Hz)
3
3-1