Clearance Control With Limited Compensation $Aa_Off_Mode - Siemens SINUMERIK 840D sl Programming Manual

Motion synchronous actions
10.4 Actions in synchronized actions
10.4.8

Clearance control with limited compensation $AA_OFF_MODE

Function
The integrating calculation of the distance values is performed with boundary check
$AA_OFF_MODE = 1
Notice
The loop gain of the overlying control loop depends on the setting for the interpolation cycle.
Remedy: Read MD for interpolation cycle and take it into account.
10-36
Programming Manual, 03/2006 Edition, 6FC5398-2BP10-1BA0
Job planning