Siemens SINUMERIK 840D sl Programming Manual page 631

PRESETON
Sets the actual value for programmed axes One axis
PRIO Keyword for setting the priority for interrupt
processing
PROC First instruction in a program
PTP point to point; point to point motion
PUTFTOC Tool offset fine for parallel dressing
(continuous dressing)
PUTFTOCF PutFineToolCorrectionFunctionDependent:
Fine tool correction depending on a
function defined by FCtDEF for continuous
dressing
PW Point weight
QECLRNOF Quadrant error compensation learning OFF
QECLRNON Quadrant error compensation learning ON
QU Fast additional (auxiliary) function output
Job planning
Programming Manual, 03/2006 Edition, 6FC5398-2BP10-1BA0
identifier is
programmed at a
time, with its
respective value
in the next
parameter.
Up to 8 axes
possible
Channel numbers
1-10 or $MC
_CHAN_NAME
Channel numbers
1-10 or $MC
_CHAN_NAME
Real, w/o
signs
15.1 List of statements
PRESETON(X,10,Y,4.5)
Block number - PROC -
identifier
PUTFTOC(1,1,2) or
PUTFTOC(CH_X, CH_Y)
PUTFTOCF(1,1,2) or
PUTFTOCF(CH_name)
Tables
m 49
S
15-27