Siemens SINUMERIK 840D sl Programming Manual page 305

Job planning

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

The commands G07/G05 are used to make it easier to program the inclined axes. Positions

can be programmed and displayed in the Cartesian coordinate system. Tool compensation

and zero offset are included in Cartesian coordinates. After the angle for the inclined axis is

programmed in the NC program, the starting position can be approached (G07) and then the

oblique plunge-cutting (G05) performed.

N20 G07 X70 Z40 F4000

N30 G05 X70 F100

Job planning

Programming Manual, 03/2006 Edition, 6FC5398-2BP10-1BA0

7.8 Kinematic transformation

Approach starting position

Activates oblique plunge-cutting

;Program angle for inclined axis

;Approach starting position

;Oblique plunge-cutting

Transformations