Huawei TP48200A-HX09A2 Installation Manual page 61

TP48200A-HX09A2 & TBC300A-TCA2
Installation Guide
Figure 6-6 Installing a water sensor in the power cabinet (in non-stacked scenario)
When installing the water sensor, keep the sensor bottom 5 mm to 10 mm away from the cabinet bottom.
Step 2 Connect the signal cable for the water sensor to the WATER port on the UIM panel, as shown
in Figure
Figure 6-7 Connecting the signal cable for the water sensor
----End
Issue 01 (2013-10-25)
6-7.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Installing Components
54