Optional) Installing An Ambient Temperature And Humidity Sensor - Huawei TP48200A-HX09A2 Installation Manual

TP48200A-HX09A2 & TBC300A-TCA2
Installation Guide
6.5 (Optional) Installing an Ambient Temperature and
Humidity Sensor
Procedure
Step 1 Open the cover for the temperature and humidity sensor.
Step 2 Connect one end of the signal cable to the temperature and humidity sensor and the other end
to the TEM-HUM port on the UIM panel, as shown in
Figure 6-8 Connecting the signal cable for the temperature and humidity sensor
Step 3 Find the fastener for the temperature and humidity sensor at the left of the cabinet top.
Step 4 Install a temperature and humidity sensor onto the fastener, as shown in
Issue 01 (2013-10-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Installing Components
Figure 6-8.
Figure 6-9.
55