Huawei TP48200A-HX09A2 Installation Manual page 94

TP48200A-HX09A2 & TBC300A-TCA2
Installation Guide
Table 10-10 IP parameters
Second-
Level
Main Menu Menu
Setting Network
Wizard Parameters
Step 3 Enter the IP address for the SMU in the address box of Internet Explorer. Log in to the
WebUI on the login page shown in
Figure 10-1 Login page
Step 4 On the System Settings tab page, select SNMP.

Issue 01 (2013-10-25)
Third-Level
Menu
IP Address
Subnet Mask
Default Gateway
 The preset user name is admin and the preset password is Changeme.
 You can set SNMP parameters on the WebUI locally or remotely.
If the SNMP version is SNMPv1 or SNMPv2c, set SNMP Version to
SNMPv1&SNMPv2c under SNMP, and then set SNMP Port Number, Read
Community Name, and Write Community Name, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Default Value
192.168.0.10
255.255.255.0
192.168.0.1
Figure 10-1.
10 Commissioning
Setting
Set this parameter according to
the IP address assigned by the
network administrator.
Set this parameter according to
the subnet mask provided by the
network administrator.
Set this parameter according to
the gateway address provided by
the network administrator.
Figure 10-2.
87