TP48200A-HX09A2 & TBC300A-TCA2
Installation Guide
Figure 6-1 Installing a rectifier
----End
6.2 (Optional) Installing a Lamp
Procedure
Step 1 Hang a lamp on the right of the rack inside the power cabinet.
Step 2 Remove the panel from the PDU in the power system.
Step 3 Connect the negative lamp cable to the load circuit breaker F5 of the PDU.
Step 4 Connect the positive lamp cable to the RTN+ busbar.
Issue 01 (2013-10-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Installing Components
50