Siemens SINUMERIK 840D sl Function Manual page 151

Index
$
$AC_WORKAREA_CS_COORD_SYSTEM, 38
$AC_WORKAREA_CS_LIMIT_MINUS, 38
$AC_WORKAREA_CS_LIMIT_PLUS, 38
$AC_WORKAREA_CS_MINUS_ENABLE, 38
$AC_WORKAREA_CS_PLUS_ENABLE, 38
A
Activation of protection zones
Example, 74
Axis clamping
Operations, optimized, 13
Axis monitoring, 5
Axis monitoring functions
Actual velocity, 21
Axis/spindlespecific setting data, 77
Constraints, 61
Following error, 8
Speed setpoint, 19
Zero speed, 11
C
Contour error, 7
Coordinate system, 41
D
DB 31, ...
DBX1.4, 13, 19
DBX1.5, 21, 22
DBX1.6, 21, 22
DBX12.0, 30
DBX12.1, 30
DBX12.2, 31
DBX12.3, 31
DBX2.2, 13, 14
DBX2.3, 13, 19
DBX39.0, 53, 55, 56
DBX60.2, 22
Basic logic functions: Axis monitoring, protection zones (A3)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0
DBX60.3, 22
DBX60.4, 29
DBX60.5, 29
DBX60.6, 11, 19
DBX60.7, 11, 19
DBX64.6, 11
DBX64.7, 11
DB21, ...
DBX10.0 to DBX11.1, 52
DBX272.0 to 273.1, 52
DBX274.0 to 275.1, 52
DBX276.0 to DBX277.1, 52
DBX278.0 to DBX279.1, 52
DBX8.0 to DBX9.1, 52
Dirt deposits, 28
E
Encoder monitoring functions, 22
Encoder frequency, 22
Encoder type, 23
Zero marks, 23, 24
G
G25, 35
G26, 35
H
Hardware faults, 28
Hardware limit switches, 30
I
Interface signals|Table, 78
L
Limit switches-monitoring, 29
Linear signal distortions, 7
85