Siemens SINUMERIK 840D sl Function Manual page 56

Data lists
5.1 Machine data
5.1.3 NC-specific machine data
Number Identifier: $MN_
10350 FASTIO_DIG_NUM_INPUTS
10360 FASTIO_DIG_NUM_OUTPUTS
10361 FASTIO_DIG_SHORT_CIRCUIT
11120 LUD_EXTENDED_SCOPE
11270 DEFAULT_VALUES_MEM_MSK
18150 MM_GUD_VALUES_MEM
5.1.4 Channelspecific machine data
Number Identifier: $MC_
21015 INVOLUTE_RADIUS_DELTA
21016 INVOLUTE_AUTO_ANGLE_LIMIT
27800 TECHNOLOGY_MODE
28150 MM_NUM_VDIVAR_ELEMENTS
28530 MM_PATH_VELO_SEGMENTS
5.1.5 Axis/spindlespecific machine data
Number Identifier: $MA_
30350 SIMU_AX_VDI_OUTPUT
33050 LUBRICATION_DIST
35590 PARAMSET_CHANGE_ENABLE
36060 STANDSTILL_VELO_TOL
36610 AX_EMERGENCY_STOP_TIME
36620 SERVO_DISABLE_DELAY_TIME
50
Description
Number of active digital NCK input bytes
Number of active digital NCK output bytes
Short-circuit digital inputs and outputs
Activate programglobal variables (PUD)
Activ.
Function: Save DEFAULT values of GUD.
Reserve memory space for GUD
Description
NC start disable without reference point
Automatic angle limitation for involute interpolation
Technology in channel
Number of write elements for PLC variables
Number of storage elements for limiting path velocity
in block
Description
Output of axis signals for simulation axes
Lubrication pulse distance
Parameter set definition possible from PLC
Maximum velocity/speed when axis/spindle stationary
Length of the braking ramp for error states
Cutout delay servo enable
Basic logic functions: Various NC/PLC interface signals and functions (A2)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0