Setup Parameter Table For Devices With S0 Interface - Siemens SENTRON 7KT PAC1600 Equipment Manual

Description
3.4 Three-phase devices 80 A
3.4.4.5

Setup parameter table for devices with S0 interface

Device-dependent parameters
Code
P1-01
P2-01
P2-02
P2-03
P2-04
P2-05
P2-06
P3-01
P3-02
P3-03
P3-04
P3-05
P3-06
P4-01
38
Description
Password
Function of output 1
Measured variable for output 1 limit
Limit 1 ON
Delay 1 ON
Limit 1 OFF
Delay 1 OFF
Function of output 2
Measured variable for output 2 limit
Limit 2 ON
Delay 2 ON
Limit 2 OFF
Delay 2 OFF
Function of input 1
Default Range
0000 0000 ... 9999
10 PUL/k
• OFF = Deactivated
Wh
• 1000 PUL/kWh
• 100 PUL/kWh
• 10 PUL/kWh
• 1 PUL/kWh
• THR = Programmable limit thresholds
01 kW See Settable values for parameters
P2.01, P3.01, P4.01 (Page 40).
100.00 0.00 ... 999.99
5 s 0 ... 9999 s
50.00 0.00 ... 999.99
5 s 0 ... 9999 s
OFF
• OFF = Disabled
• 1000 PUL/kWh
• 100 PUL/kWh
• 10 PUL/kWh
• 1 PUL/kWh
• THR = programmable thresholds
01 kW See Settable values for parameters
P2.01, P3.01, P4.01 (Page 40).
100.00 0.00 ... 999.99
5 s 0 ... 9999 s
50.00 0.00 ... 999.99
5 s 0 ... 9999 s
OFF
• OFF = Deactivated
• ON = Activated
• TAR = Tariff selection
• CLr Part = Clear partial energy meter
• CLr Hr = Clear hour counter
• CLr dE = Clear max. demand values
Equipment Manual, 09/2020, 2514284147-04
7KT16 energy meter