Siemens SENTRON 7KT PAC1600 Equipment Manual page 58

Description
3.5 Three-phase devices 5 A
P03 Password
P03.01
P03.02
P03.03
P03.01 When OFF is set, the password setting is deactivated and access to settings and the
P03.02 When P03.01 is active, value for specifying user access.
P03.03 Similar to P03.02, administrator access.
P04 Integration
P04.01
P04.02
P04.03
P04.04
P04.05
P04.01 Integrated measurement calculation mode
P04.02 Average (AVG) integration time of measurement for active, reactive and apparent
P04.03 Average (AVG) integration time of currents.
P04.04 Average (AVG) integration time of voltages.
P04.05 Average (AVG) integration time of frequency.
56
Password Enable
Password User
Password advanced
command menu is unrestricted. You can find more information in chapter Com-
mand menu (Page 64).
Averaging
Power demand values
Current demand values
Voltage demand values
Frequency demand values
• Fixed = The instantaneous measurements are integrated for the set time. Every
time this set time elapses, the integrated measurement is updated with the
result of the most recent integration.
• Shift = The instantaneous measurements are integrated for a time = 1/15 of
the set time. Every time this interval elapses, the oldest value is replaced by the
newly calculated value. The integrated measurement is updated every 1/15 of
the set time. A time shift window with the 15 most recent calculated values
which correspond to the set time is taken into account here.
• Bus = As a fixed mode; however, the integration intervals are defined by means
of synchronization commands sent on the serial bus.
power.
Unit Default
– OFF
1000
2000
Unit Default
– Shift
min 15
1
Equipment Manual, 09/2020, 2514284147-04
Range
• OFF
• ON
0 ... 9999
Range
• Fixed
• Shift
• Bus
1 ... 60
7KT16 energy meter