Description
3.5 Three-phase devices 5 A
3.5
Three-phase devices 5 A
①
②
③
④
⑤
⑥
Basic properties
• DIN rail enclosure, 4 MW (72 mm wide)
• Current transformer connection x / 5 A
• LCD with backlighting
• 3 keys for selecting measured variables and for setting parameters
• Active and reactive energy meter
• Partial meter for active and reactive energy
• Several hour counters
• Two-level password protection
• Pulse LED for active energy consumption
• Display of instantaneous consumption (active power)
• Optional: RS 485, M-Bus or S0 interface
• Optional: MID certification
42
Sealing cover
Display
Active energy pulse indicator
The red LED on the front panel outputs 10000 pulses for every kWh of energy consumed or
output, with reference to the secondary current transformer.
The flashing frequency of the LED immediately indicates how much current is required in any
particular moment.
The duration of flashing, the color and the intensity of the LED correspond to the standards
which specify their use for testing the accuracy of measurement of the energy meter.
"Increase" key
"Decrease" key
"Next" key
You will find information on operation in chapter Keypad functions
(Page 43) ff.
7KT16 energy meter
Equipment Manual, 09/2020, 2514284147-04