P07.01 Primary address for M-Bus network
P07.02 Secondary address for M-Bus network
P07.03 Speed of communication
P08 Limit thresholds (LIMn, n = 1 to 4)
Note
This menu is divided into 4 sections for limit thresholds LIM 1 ... 4 in P08.n.01. The menu
defines the energy meter measurement to which the limit threshold applies.
P08.n.01
P08.n.02
P08.n.03
P08.n.04
P08.n.05
P08.n.06
P08.n.07
P08.n.08
P08.n.09
P08.n.10
P08.n.02 Defines the energy meter measurement to which the limit threshold applies.
P08.n.03
,
P08.n.04
P08.n.05 Triggering delay for upper threshold.
P08.n.06
,
P08.n.07
P08.n.08 Triggering delay for lower threshold.
P08.n.09 Permits inversion of the status of limit threshold LIMn.
P08.n.10 • ON = Threshold value is saved and must be reset manually.
7KT16 energy meter
Equipment Manual, 09/2020, 2514284147-04
Reference measure
Function
Upper threshold
Multiplier
Delay
Lower threshold
Multiplier
Delay
Status
Reset mode
• Max = LIMn active if the measurement exceeds P08. P08.n.03 is the reset
threshold.
• Min = LIMn active if the measurement falls below P08. P08.n.06 is the reset
threshold.
• Min + Max = LIMn active if the measurement exceeds P08.n.03 or falls below
P08.n.06.
Defines the upper threshold resulting from the multiplication of the value P08.n.03
by P08.n.04.
Defines the lower threshold resulting from the multiplication of the value P08.n.06
by P08.n.07.
• OFF = Threshold value is saved and is reset automatically.
Unit
Default
–
OFF
Max
0
x1
s
0
–
x1
s
0
–
OFF
Description
3.5 Three-phase devices 5 A
Range
OFF ... (measures)
•
Max
•
Min
•
Max + Min
−9999 ... +9999
/100 ... x10k
0.0 ... +1000.0
−9999 ... +9999
/100 ... x10k
0.0 ... +1000.0
•
OFF
•
ON
59