Siemens SIMATIC RF600 Series System Manual page 13

Introduction
1.1 Preface
Purpose of this document
This system manual contains the information needed to plan and configure the RF600
system.
It is intended both for programming and testing/debugging personnel who commission the
system themselves and connect it with other units (automation systems, further
programming devices), as well as for service and maintenance personnel who install
expansions or carry out fault/error analyses.
Scope of this documentation
This documentation is valid for all supplied versions of the SIMATIC RF600 system and
describes the state of delivery as of 12/2015. If you are using older firmware versions, please
refer to the 08/2011 edition of the documentation.
Registered trademarks
SIMATIC
trademarks of Siemens AG.
History
Edition
11/2005
03/2006
04/2006
06/2006
07/2008
11/2008
07/2009
10/2009
12/2009
06/2010
09/2010
SIMATIC RF600
System Manual, 10/2016, J31069-D0171-U001-A19-7618
, SIMATIC RF , MOBY
® ®
Comment
First edition
2nd revised edition
3rd revised and extended edition:
Details in the technical descriptions were revised.
4th revised and extended edition:
5th revised and extended edition:
6th revised and extended edition:
New RF620R and RF630R readers
7th revised and extended edition:
FCC approval RF620R/RF630R
8th revised and expanded edition for multitag mode
9th revised and extended edition
10th revised and extended edition
11th revised edition
, RF MANAGER and SIMATIC Sensors
® ®
1
are registered
®
13