Siemens SIMATIC RF600 Series System Manual page 37

Features of the scenario
In this example scenario. items must be distributed to the correct storage location in a
transport container via a separating filter. The RFID transponders of the type SIMATIC
RF630L are directly attached to the item. The maximum transport speed of the conveyor belt
is 2 m/s.
In this scenario, bulk acquisition is necessary because several objects must be detected at
the same time.
The SIMATIC RF680R reader uses two external antennas in a portal arrangement to read
the information from the transponders on the passing items and transfers it to the SIMATIC
S7 controller via a communications module. The SIMATIC S7 controls the sorter of the
conveyor system depending on the transponder information.
The SIMATIC RF650M mobile reader is used in this example for additional evaluation and
visualization of the article data directly on site.
SIMATIC RF600
System Manual, 10/2016, J31069-D0171-U001-A19-7618
RF600 system planning
4.2 Possible system configurations
37