Siemens SIMATIC RF600 Series System Manual page 240

Antennas
6.5 RF650A antenna
6.5.2 Ordering data
Table 6- 22
Product
SIMATIC RF650A
Table 6- 23
Product
Connecting cable between
reader and antenna
Antenna mounting kit
6.5.3 Installation
VESA 100 mounting system
A standardized VESA 100 mounting system is provided to mount the antenna. The mounting
system consists of four fixing holes for M4 screws at intervals of 100 mm.
This is therefore suitable for:
● Mounting on metallic and non-metallic backgrounds
Note
Reaching the optimum wave propagation
To achieve optimum wave propagation, the antenna should not be surrounded by conducting
objects. The area between antenna and transponder should also allow wave propagation
without interference.
240
Ordering data RF650A
Ordering data accessories
1 m (cable loss 0.5 dB)
3 m (cable loss 1.0 dB)
5 m, suitable for drag chains
(cable loss 1.5 dB)
10 m (cable loss 2.0 dB)
10 m (cable loss 4.0 dB)
15 m, suitable for drag chains
(cable loss 4.0 dB)
20 m (cable loss 4.0 dB)
40 m (cable loss 5.0 dB)
See "SIMATIC RF600 System
Manual", section "Antennas" >
"Mounting types"
Article number
6GT2812-0GB08
Article number
6GT2815-0BH10
6GT2815-0BH30
6GT2815-2BH50
6GT2815-1BN10
6GT2815-0BN10
6GT2815-2BN15
6GT2815-0BN20
6GT2815-0BN40
6GT2890-0AA00
System Manual, 10/2016, J31069-D0171-U001-A19-7618
SIMATIC RF600