Siemens SIMATIC RF600 Series System Manual page 203

Table 6- 12
Cable designa-
tion
RF640A con-
necting cable
Antenna cable
Antenna cable
Antenna cable
(suitable for drag
chains)
Antenna cable
Antenna cable
Antenna cable
(suitable for drag
chains)
Antenna cable
Antenna cable
With cables capable of being used in drag chains, 100,000 bending cycles at a bending radius of
1)
100 mm and a bend through ± 180° or 3 million torsion cycles with a bend of ± 180° on a cable
length of 1 m are permitted.
6.3.5 Antenna parameter assignment
6.3.5.1 Setting RF640A parameters for RF650R
Operation within the EU according to DIN EN 302208 V1.4.1
Note
Limitation of the radiated power according to DIN EN 302208 V1.4.1
RF600 systems that are put into operation within the EU, EFTA, or Turkey (ETSI) can be
operated with an RF640A antenna with a maximum radiated power of 2000 mW ERP (or 33
dBm ERP, 3250 mW EIRP, 35 dBm EIRP).
By setting a radiated power of up to 1360 mW ERP (or 31.35 dBm ERP, 2240 mW EIRP,
33.5 dBm EIRP), an RF640A antenna gain of 4 dBi (7 dBic) and taking into account the
cable loss associated with the antenna cable (see table (Page 202)), the maximum permitted
radiated power of the reader is correctly configured and the radiated power at the antenna is
not exceeded.
SIMATIC RF600
System Manual, 10/2016, J31069-D0171-U001-A19-7618
Bending radii and bending cycles of the antenna cable
Article number Length [m]
Fixed connection 0.3
to antenna
6GT2815-0BH10 1
6GT2815-0BH30 3
6GT2815-2BH50 5
6GT2815-1BN10 10
6GT2815-0BN10 10
6GT2815-0BN15 15
6GT2815-0BN20 20
6GT2815-0BN40 40
6.3 Antenna RF640A
Cable loss Bending radi-
[dB] us [mm]
-- 15
0.5 51
1 51
1.5 48
2 77
4 51
4 24
4 77
5 77
Antennas
Bending cycle
1x
1x
1x
1)
1x
1x
1)
1x
1x
203