GE CT-9800 Technical Publications page 468

GE MEDICAL SYSTEMS
Rev. 3
503 01F7
Insufficient memory for short IORP's (master).
504 01F8
Insufficient memory for long IORP's (master).
505 01F9
Insufficient memory for buffers (master).
506 01FA
Insufficient memory for short IORP's (slave).
507 01FB
Insufficient memory for long IORP's (slave).
508 01FC
Insufficient memory for buffers (slave).
600 0258
Allocate IORP error - insufficient memory available system will have to be
reconfigured with less IOPs.
601 0259
Allocate device control block extension error - same cause and corrective
action as above (600).
602 025A
Device type error - device doesn't agree with MG$IOPAT edit SYSAT.SA to show
correct AP configuration or repair device.
700 02BC
Insufficient memory available - you have configured too many IOPs.
701 02BD
IOP-1 is not an IBM IOP.
702 02BE
IOP-2 is not an IBM IOP.
703 02BF
IOP-3 is not an IBM IOP.
704 02C0
IOP-4 is not an IBM IOP.
705 02C1
IOP-5 is not an IBM IOP.
706 02C2
IOP-6 is not an IBM IOP.
707 02C3
IOP-7 is not an IBM IOP.
710 02C6
NO memory for DCBX.
711 02C7
No memory for IORP.
712 02C8
No memory for CCB.
713 02C9
IOP-1 not responding.
714 02CA
IOP-2 not responding.
715 02CB
IOP-3 not responding.
716 02CC
IOP-4 not responding.
MPIOUTL CONFIG. FILE ERROR, MASTER, PM
MPIOUTL CONFIG. FILE ERROR, MASTER, PM
MPIOUTL CONFIG. FILE ERROR, MASTER, PM
MPIOUTL CONFIG. FILE ERROR, SLAVE, PM, MASTER
MPIOUTL CONFIG. FILE ERROR, SLAVE, PM, MASTER
MPIOUTL CONFIG. FILE ERROR, SLAVE, PM, MASTER
MPVACM BAD APM LOAD, MASTER
MPVACM MASTER, PM
MPVACM WRONG IOP DEVICE, BAD IOP(DAS,HOST)
MPIBMCM BAD APM LOAD, MASTER
MPIBMCM - NOT USED -
MPIBMCM - NOT USED -
MPIBMCM - NOT USED -
MPIBMCM - NOT USED -
MPIBMCM - NOT USED -
MPIBMCM - NOT USED -
MPIBMCM - NOT USED -
MPIBMCM - NOT USED -
MPIBMCM - NOT USED -
MPIBMCM - NOT USED -
MPIBMCM IOP, IOC, PM, MMC
MPIBMCM IOP, IOC, PM, MMC
MPIBMCM IOP, IOC, PM, MMC
MPIBMCM IOP, IOC, PM, MMC
8-6-30
CT 9800 QUICK SYSTEM
Direction 18000