GE CT-9800 Technical Publications page 92

GE MEDICAL SYSTEMS
Rev. 24
THE FOLLOWING IS THE CONFIGURATION INFORMATION FOR A DUAL ACE DRIVE SYSTEM:
Enter command (? to see choices): A<CR>
You must have a printer at device code 17 to log your dialogue to a printer.
Do you have such a printer (Y or [N]) ? N<CR>
?
CT - Department CT
MR - Department MR
HTD - High Throughput Dynamic
ND - No Disk
Select Disk (or EN or END disk selection): CT<CR>
How many drives in this system (1-4) ? 2<CR>
...Disk type(s) accepted.
Enter BMC priority (0=lowest, 7=highest: S280 and MV4000 0-3 only [5 ] : <CR>
Field accepted.
What is the throttle burst rate
What is the throttle break count [4 ] ? <CR>
Current Configuration Facts:
Heads
Sectors
Cylinders
Formt'd megs
Logical blks
To see the partitioning of a logical unit, enter the unit number: <CR>
______________________________________________________________________
Microcode on logical unit
BMC priority ............
Throttle burst rate .....
Break count .............
Enter command (? to see choices): ?U<CR>
Updating...Please wait.
...EPROM updated successfully.
If you have changed something and do not wish to have the changes saved use the " [Q]uit " command.
Enter command (? to see choices): Q<CR>
EEPROM not updated!
After the program has terminated, you may need to do some of the following:
Format or reformat the disk.
Initialize or re-initialize the disk.
Do you want to configure another GESCSI controller (Y/[N]) ?N<CR>
!
Disk Selection
[32 ] ? <CR>
Logical Logical
Unit 0 Unit 1
1 1
128 128
9161 0
600 0
1172316 0
0
5
32
4
Do you really want to abandon these edits (Y/N) ? Y<CR>
4-3- 48
C1 - Department CT using 1 ST34520N
M1 - Department MR using 1 ST34520N
UD - User-defined
For 2 Disk system.
Logical Logical
Unit 2 Unit 3
1 1
128 128
0 8
0 0
0 726
CT9800 QUICK SYSTEM
Direction 18000