Huawei SmartAX MA5600T Hardware Description page 139

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description
Table 2-34 Boards in the MA5603T chassis
Slot Type
Control board
(SCU) slot
Uplink
interface
board (GIU)
slot
Power board
slot
Universal
interface
board (GPIO)
slot
Service board
slot
Issue 24 (2018-07-30)
Slot Supported Board
6,7 Control board
8,9 Uplink interface board
10,11 Power board
12 l Universal interface
board
l Vectoring processing
board
0-5 l Service board
– SPU board
– Ethernet service
access board
– TDM service
processing board
– GPON service board
– 10G GPON service
board
– P2P interface board
– ATM interface board
– Combo board
– Voice board
– ADSL2+ service
board
– VDSL2 service board
– SHDSL service
board
l SPL board
– ADSL SPL board
– VDSL SPL board
l Extension board
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Subrack and Chassis
Remarks
Two slots must be configured
with the same control board.
You are advised to configure
2 control boards working in
active/standby mode.
Mixed configuration of
upstream interface boards is
supported; however, it is
recommended to use the same
upstream interface board in
the configuration.
It is recommended to
configure the same power
board in the two slots.
-
Mixed configuration of
service boards is supported.
When the SPL board is
configured in the slot, select
the slot next to the
corresponding service board.
119