Huawei SmartAX MA5600T Hardware Description page 950

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description
Table 6-15 Mapping between the quantity of power supply modules of the ETP4890 power
system and the maximum output current
Quantity of Power Supply Modules
1
2
3
Communication Ports on the Monitoring Module
Table 6-16
rate of the device using the LCD interface of the monitoring module.
Table 6-16 Communication ports on the monitoring module
Communication
Port
COM
RS485/RS232
NOTE
Indicators
Table 6-17
Table 6-17 Indicators on the power supply module of the ETP4890 power system
Indicator
Power indicator
Issue 24 (2018-07-30)
lists the communication ports on the monitoring module. A user can set the baud
Communication
Mode
RS485/RS232
RS485/RS232
By default, the ETP4890 power system is equipped with a monitoring module, which is capable of the
inband management (SMU01B). The COM port cannot be used as a network port.
lists the indicators on the power supply module of the ETP4890 power system.
Color
Green
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Electromechanical Device
Maximum Output Current
l 30 A (at 55°C)
l 25 A (at 60°C)
l 60 A (at 55°C)
l 50 A (at 60°C)
l 90 A (at 55°C)
l 75 A (at 60°C)
Communication Description
Parameter
Baud rate: 9600 bit/s Used as a serial port,
or 19200 bit/s communicating with
the upper device
Baud rate: 9600 bit/s Used as a serial port,
or 19200 bit/s supporting the
northbound/
southbound
communications
Status Description
Steady on Normal
930