Huawei SmartAX MA5600T Hardware Description page 442

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description
ADSL2+ Specifications Comparison
Table 3-40 Specifications lists of 48-channel ADSL2+ service boards
Specifications
Applicable Line
Physical Layer
Retransmission
(G.INP)
ADSL2+ Bonding
INM
SELT
xDSL MELT
Annex Type
Flexible
Configuration Modes
Connector
Built-in Splitter
Temperature Query
and High-
temperature Alarm
Automatic Power
Shutdown in Case of
a High Temperature
Issue 24 (2018-07-30)
H80BCAME
ADSL2+ over POTS
Yes (Supported by V800R009C00 and
later)
Yes
Yes
Yes
No
l G.992.1 Annex A
l G.992.3 Annex A/L/M (EU32-EU64)
l G.992.5 Annex A/M (EU32-EU64)
Supports RFC2662, RFC4706, and
TR165. (Users with a super user account
can log in to the system and run the
switch adsl mode to command in
diagnose mode to switch between the
configuration modes. The default
configuration mode is RFC2662.
Considering the current development
trend, it is recommended that you use
TR165, which is more flexible than the
others)
Delander 64-pin
Yes
Yes
Yes
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
H806CAME
ADSL2+ over POTS
No
No
No
Yes
No
l G.992.1 Annex A
l G.992.3 Annex A/L/M (EU32-EU64)
l G.992.5 Annex A/M (EU32-EU64)
Supports RFC2662, RFC4706, and
TR165. (Users with a super user account
can log in to the system and run the
switch adsl mode to command in
diagnose mode to switch between the
configuration modes. The default
configuration mode is RFC2662.
Considering the current development
trend, it is recommended that you use
TR165, which is more flexible than the
others)
Delander 64-pin
Yes
Yes
Yes
3 Board
422