Configuration (Ma5608T) - Huawei SmartAX MA5600T Hardware Description

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description
NOTE

1.1.4 Configuration (MA5608T)

The N63E-22 cabinet adopts the DC power. This topic describes the MA5608T configuration
of the N63E-22 cabinet, and lists the maximum number of chassises of the cabinet.
The N63E-22 cabinet has the following configurations:
l
l
Configuration of One MA5608T
Figure 1-7
Issue 24 (2018-07-30)
l The filled holes are for floating nuts to fasten subracks.
l For the I-type or C3-type PDU, use installation holes 79 and 82; for the B-type PDU, use installation
holes 79 and 81.
l The OFMS-1*8, FTU, and S2318 shown in
master cabinet and they need to be installed onsite. For details, see iManager N2510 Line Assurance
System.
Configuration of one MA5608T
Configuration of two MA5608T
shows the configuration of the N63E-22 cabinet installed with one MA5608T.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 1-6 are required when the cabinet functions as a
1 Cabinet
14