Huawei SmartAX MA5600T Hardware Description page 227

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description
Working Principle
Figure 3-7 Working principle of the H802SCUB board
Backplane
Uplink
board
(slot 1)
Uplink
board
(slot 2)
Service
board
-48V DC
power
The basic working principle of the H802SCUB board is as follows:
l
l
l
l
Issue 24 (2018-07-30)
H802SCUB
3*GE
Electronic
Switch
Module
Daughter
board
16*GE
Voltage required
by the board
Service Control
signal signal
The control module manages the H802SCUB board and service boards, and
communicates with the fan tray through the extended serial port.
The power module supplies power to other functional modules of the board.
The clock module provides clock signals for other functional modules of the board.
The switching module provides the GE port to switch and aggregate services at Layer 2
or Layer 3.
– Providing 16 GE ports to implement GE switching on each service board
– Providing four GE ports for upstream transmission using the control board or
upstream board (in the first of the two slots for the upstream board), which is
controlled by the electronic switch.
– Providing four GE ports for upstream transmission using the upstream board (in the
second of the two slots for the upstream board). Either the last GE port or VoIP
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Electronic
GE
4*GE
Clock
Power
module
module
Clock required
by the board
Monitoring
signal
TX0/RX0
Switch
Module
TX3/RX3
Maintenance
serial port
Maintenance
network port
Control
module
Monitoring
serial port
Power
signal
3 Board
Clock
signal
207